Contact Us
◆The SYM press adopts high quality steel plate,high pre-cision,high strength design,welding after stress treatment,accuracy stability and reliability.
◆In order to ensure the relative stability of the machine,the pneumatic balancer is adopted.
◆The precision of mould adjustment is up to 0.1mm safety,convenient and reliable.
◆Crankshaft,gear,screw and other parts,after hard oxi-dation and grinding treatment,with extremely high mechan-ical and wear resistance.
◆Machine structure design reasonable,complete configu-ration,easy to achieve automatic production line and as-sembly line production.
◆High performance combined clutch /brake,combinedwith stable,safe and reliable.
◆Adopt safety double solenoid valve and hydraulic over-load protection device to ensure production and operationsafety.
◆The machine adopts closed frame structure design,withstable stamping precision,which can effectively improve theservice life of the die.
◆With closed electrical circuit design,can be matched withany automation equipment.
Optoelectronic safety device |
Misdelivery detection device |
Three in one NC straightening feeder straightening machine (leveling machine)
|
Upper material pushing device of the slider
|
Feihan brake device |
Mold lifter and mold moving arm
|
Upper/Lower Clampers | Quick mold changing device |
Safety stop and safety pin with inspection dual solenoid valve |
Hydraulic overloadprotector | Dual solenoid value | Crankshaft angle indicator | Missfeed detection circuit |
Automatic slide adjust device | Frequency conversion | Ovenun detector | Oil collecting silencer |
Automatic die height indicator | Electronic cam | Automatic lubrication system |
Specifications | Unit | SYM-110 | SYM-300 | SYM-600 | |||
Model |
| V | H | v | H | Small countertop | Large countertop |
Capacity | Ton | 110 | 300 | 600 | |||
Rated Tonnage point | mm | 5 | 3 | 7 | 3 | 10 | |
Stroke | mm | 180 | 110 | 300 | 170 | 300 | |
Stroke Per Minute | S.p.m | 30-65 | 50-100 | 20-35 | 30-50 | 15-25 | |
Die Height | mm | 400 | 350 | 550 | 450 | 600 | |
Slide Adjustment | mm | 100 | 120 | 120 | |||
Slide Area | mm | 1400x550 | 2400×900 | 2740x1200 | 3400x1200 | ||
Bolster Area | mm | 1550x750 | 2500x1000 | 3000x1300 | 3600x1300 | ||
Shank Hole | mm | 600x400 | 900x600 | 1100x700 | |||
Main Motor | kw.p | 11x4 | 30x4 | 55x4 | |||
Air Pressure | kg/cm² | 6 | |||||
Presses Precision |
| GB/JIS 1class First level |
Tel:021-5456 1588